PaintBox QAL – Week 5 – Quilt Top Assembly

PaintBox Front Cover copyHello again!  Whoop!  Whoop!  We are approaching the final weeks in our Paint Box QuiltAlong!  This week is all about assembling your quilt top and stitching it all together! Next week in our final week, I will be showing how I’ll be machine quilting my top on my domestic sewing machine!

But when last we spoke in Week #4 Blog’s Post, I mentioned that once I had laid out all my units on my design board, I was pondering whether I wanted to fiddle with the layout to play with the subtle color changes in this Linen Texture strip roll designed by Laundry Basket Quilts.  You’ll find the Quilt Top Layout Diagram on page 6 of the PaintBox pattern.

Here’s where we left off last week with my layout :

Layout 1

LAYOUT #1

I did fiddle with color placement  here and there and finally ended up with the new layout below –  do you see the difference?…Instead of keeping color groupings close together, I mixed up each quandrants’ units (for example the violets and pink palettes) to see if the colors would morph or “move” across the quilt top better.  Mmmmmmmm….

LAYOUT 2

LAYOUT #2

See the difference side by side??

Lol! After an hour or so of pondering this and some choice comments from Carl like “What’s that?!?  What happened to the first layout?” I decided to back to the first layout!  LOL!  Sometimes you first instinct is indeed the best!

Layout 1

LAYOUT #1

First Make Blocks!  So once you have decided on your layout, it’s time to start stitching, but first things first:   We need to make blocks out of those sashing triangles and colored triangle units so the quilt top goes together much more easily.  BIG TIP!  BE SURE TO SNAP A PHOTO FOR REFERENCE OF YOUR FINAL LAYOUT!  YOU’LL NEED IT!

Start with Row 2’s first sashing triangle and the orange colored triangle (note the yellow circle below and refer to the layout diagram on page 6 of the pattern).   Place these 2 units right sides together and stitch down the long diagonal edge.  TIP!  Sometimes I mark or crease the center of the colored triangle unit so that I can pin the center seams of the units together.  Remember these are triangles and the fabric has been cut on the bias so those edges can stretch out of shape very easily.  Having that center seam pinned aids you in placing the the 2 units together at their centers and then you also know that the outer tips of the 2 triangles have to meet as well when stitching!

Press the seam toward the coloured triangle unit and repeat until you have stitched all units together.  Referring to page 4 – Step 5 in the Paint Box pattern trim the blocks down to the desired size.  TIP! TIP!  Be sure to use  the diagonal line of your square ruler along the diagonal line of the block to aid you in squaring up the block to the appropriate size.  Note from the pics below that you probably won’t be trimming very much off – just a sliver here and there.

I usually sew these block units together quadrant by quadrant – meaning I pick up all the triangles from the top color  quadrant and sew those units together, then the second and so on like below:

Once complete, refer to your layout photo and return the blocks to places.

Now you are ready to start assembling the quilt top row by row.  Most of your seams usually end up nicely nesting together from block to block simply because of how you  rotated the ruler while cutting the triangles in Week #3.

Nest 4
However, you may find that some seams will need to be repressed in the opposite direction to make the seams nest before you stitch the blocks together. I found that I repressed about half of the sashing triangle seams in the opposite direction before sewing the triangle units together to form a block.

Again referring to the layout on page 6, notice that the rows are on point and you will be stitching block to block to block to form diagonal rows.  Sometimes (even though my diagram in the pattern shows this differently) I find it easier to toss aside the outer colored triangles that make up the top and bottom corner units (i.e.: Row #1) and just concentrate on getting the other rows together first. I usually stitch the top half together first and put it aside, followed by the bottom half and then join to the 2 halves together to complete the top.

Halves

When you join the 2 halves together – pin, pin, pin!!

Pin1

Again, some seams will nest and some will not.

I’m not the most patient quilter and at this point I am anxious to see my top done, so I usually pin at each and every seam regardless if the seams are nesting or not and stitch the top together.  Most times the quilting gods are with me and it works out beautifully! 🙂

Pin 4

Here is my quilt top with the corner units left off.  As a sidenote: You could indeed leave the quilt top just like this if you wanted more of a hexagon shaped quilt or were perhaps using it as a table topper of some sort. It’s kinda different looking!

Corners Off

Next stitch the 2 outer colored triangles together to form your corner units.

And to complete the top, stitch these outer corner units on!  Voila!  Just like that you PaintBox quilt top is complete!

Top Done

That’s it for this week!  Join us next week for Week #6 – Machine Quilting the Top where I’ll share how I am machine quilting my Paint Box quilt using my domestic machine, some straight line quilting techniques  and perhaps a few decorative stitches as well!

Until then, please be sure to email us at colourwerx@yahoo.com if you have any questions.  Or feel free to post progress pictures on our Colourwerx QAL Facebook Group.

Until your next colour fix and next week’s QAL post ~  happy and bright quilting always!    L&C xxoo

 

 

 

 

 

 

One thought on “PaintBox QAL – Week 5 – Quilt Top Assembly

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s